Digital Multimeter Tester 7 Functions – Your Guide

You are welcome to your comprehensive guide on digital multimeter testers with 7 functions. In the following paragraphs, we shall explore some great benefits of utilizing a digital multimeter tester, the significance of understanding how to use a multimeter function, and analyze the price and price of Cen Tech digital multimeters. Whether you’re a novice or perhaps a seasoned professional, this informative guide offers you the knowledge and insights to take full advantage of your digital multimeter tester.

Primary Takeaways:

Digital multimeter testers with 7 functions offer an array of measurements featuring
Understanding how to use a Cen Tech 7 Function Digital Multimeter is vital for accurate readings
The cost of Cen Tech digital multimeters varies according to features and gratification
Proper safety precautions and operating instructions are essential when you use a multimeter
Accessories and add-ons can enhance the functionality and versatility of the multimeter

Understanding Digital Multimeter Tester 7 Functions

In order to effectively employ a digital multimeter tester, it is very important possess a thorough comprehension of its various functions. A digital multimeter tester is a versatile tool used for electrical testing and measurements, competent at providing accurate readings across multiple parameters.

With a digital multimeter tester, you are able to perform following measurements:

Voltage: Determine the electrical potential distinction between two points inside a circuit.
Current: Measure the flow of electric charge by way of a circuit.
Resistance: Determine the opposition towards the flow of electric current in a circuit.
Continuity: Test in case a circuit is complete or broken.
Diode: Look into the functionality of diodes in a circuit.
Capacitance: Look at the ability of the component to hold electrical charge.
Frequency: Determine the quantity of cycles per second inside an electrical signal.

Understanding the functions of the digital multimeter tester is important for accurate measurement and troubleshooting. It enables you to diagnose electrical issues, identify faulty components, and make sure the appropriate functioning of circuits and devices.

Here are some ideas to effectively make use of a digital multimeter tester:

Read the user manual: Fully familiarize yourself with the specific features and operating instructions of the multimeter.
Pick the appropriate function: Pick the function that suits the measurement you need to take.
Set the proper range: Adjust the range around the multimeter to match the expected price of the measurement.
Utilize the proper probes: Make sure you are employing the proper probes for the measurement you take.
Take accurate readings: Make sure the probes are properly in contact with all the test points and steer clear of touching exposed conductors.
Interpret the readings: Be aware of the units of measurement and interpret the readings accordingly.
Practice safety precautions: Always follow safety guidelines to guard yourself and prevent injury to the multimeter and electrical systems.

By comprehending the functions of a digital multimeter tester and following proper usage techniques, you can confidently perform electrical measurements and effectively troubleshoot electrical issues.

Expert Insight:

“A digital multimeter tester is actually a versatile tool that will provide invaluable information about electrical systems. Understanding its functions is vital for both professionals and hobbyists to guarantee accurate measurements and keep electrical safety.”
– John Smith, Electrical Engineer

Safety Precautions and Operating Instructions

When utilizing a digital multimeter tester, it is crucial to prioritize safety precautions to make sure your well-being and prevent any potential hazards. Ignoring safety guidelines can lead to accidents, injury to equipment, or even electrical shocks. By following these essential safety precautions and operating instructions, you may use your multimeter effectively and with confidence.

Safety Precautions:

Before starting any measurements, always shut off the power and disconnect the machine through the power source.
Wear appropriate personal protective equipment, like safety glasses and insulated gloves, when handling electrical components.
Avoid touching the exposed metal parts in the multimeter probes while conducting measurements.
Be sure that the multimeter’s voltage range is set more than the expected voltage level.
Never utilize a multimeter in wet or damp environments to avoid electrical short circuits.
Stay away from a damaged or malfunctioning multimeter; replace any cracked or broken parts immediately.

Operating Instructions:

Choose the appropriate measurement function in the multimeter for that specific task you want to perform.
Choose the appropriate range around the multimeter depending on the expected magnitude of the measurement.
Connect the multimeter probes for the circuit or component you need to measure. Ensure a secure and proper connection.
Browse the measurement value through the multimeter’s display. Pay attention to relevant units and decimal points.
After completing the measurement, disconnect the multimeter probes through the circuit or component.
Switch the multimeter off to conserve battery life.

Methods for Proper Maintenance:

Store your multimeter inside a clean and dry location to protect it from dust and humidity.
Regularly check the condition of the multimeter probes and cables for any indications of wear or damage.
Calibrate your multimeter periodically to make certain accurate measurements. Adhere to the manufacturer’s instructions for calibration.
Reference the multimeter’s user manual for just about any specific maintenance requirements or recommendations.

By adhering to these safety precautions and operating instructions, it is possible to confidently make use of digital multimeter tester to accurately measure voltage, current, resistance, along with other electrical parameters. Remember, safety should always be your main concern whenever using electricity.

Setting Up Your Multimeter for Accurate Readings

When it comes to employing a digital multimeter, accurate readings are crucial for reliable measurements. To make certain precise results, it’s crucial to set up your multimeter correctly. Here’s one step-by-step guide to acquire your multimeter ready for accurate readings.

Pick the appropriate measurement function: Before starting, determine the type of measurement you have to take. Common measurement functions include voltage, current, resistance, and continuity. Pick the function that suits your testing requirements.
Set the range: Once you’ve chosen the measurement function, set the range on your multimeter. The range indicates the maximum value that this multimeter can measure accurately. Make sure to select a range that is ideal for the expected voltage, current, or resistance level.
Connect the test leads: Attach the exam results in the proper terminals on the multimeter. Typically, the red lead is connected to the positive terminal, and also the black lead is connected to the negative terminal.
Zero the multimeter: To make certain accurate readings, it’s important to zero out the multimeter before each measurement. This method eliminates any residual voltage or resistance from previous measurements. Consult your multimeter’s user manual for specific instructions on zeroing out the device.
Verify the calibration: It’s essential to regularly calibrate your multimeter to maintain accuracy. Utilize a known reference signal or a calibration device to verify the calibration of your multimeter. Refer to your multimeter’s manual for calibration instructions.
Test and adjust: Once your multimeter is to establish, test it on the known reference signal or a calibrated device. Compare the measured value using the expected value to make sure accuracy. If there is a discrepancy, consult the troubleshooting section of your multimeter’s manual for assistance with adjusting the settings.

By simply following these steps to setup your multimeter, you are able to ensure accurate readings and acquire reliable measurements for the electrical testing needs.

Using a Cen Tech 7 Function Digital Multimeter

Utilizing a Cen Tech 7 Function Digital Multimeter is actually a straightforward and efficient way to measure various electrical parameters. If you are an expert electrician or perhaps a DIY enthusiast, understanding the way you use this versatile tool is important. This section offers you step-by-step instructions, explanations of their different functions and has, along with useful tricks and tips to make certain accurate measurements and trouble-free operation.

Before diving into the details, it’s important to familiarize yourself with the essential components of a Cen Tech 7 Function Digital Multimeter. The device typically consists of a digital display, selection dial, input jacks, and performance buttons. Be sure to make reference to the consumer manual specific to your Cen Tech model for detailed instructions.

Step 1: Putting Together the Multimeter

Before you start utilizing your Cen Tech multimeter, ensure it is properly setup for that type of measurement you want to perform. Begin by choosing the appropriate function around the dial in accordance with the parameter you intend to measure, such as voltage, resistance, or current.

Next, depending on the measurement, choose the appropriate input jack to get in touch the exam leads. For voltage and resistance measurements, use the jacks labeled “VOmA” or “COM” (common). For current measurements, plug the red lead into the “10A” jack.

Step 2: Taking Measurements

As soon as your multimeter is established, you can begin taking measurements. Here’s a breakdown of the key functions:

Voltage Measurement: To measure voltage, guarantee the dial is defined to the appropriate range for your measurement (AC or DC). Connect the black test lead to the COM jack as well as the red lead towards the jack labeled “VOmA”. Place the probes throughout the component or circuit you need to measure, making certain the polarity is correct.
Resistance Measurement: Select the resistance (O) function on the dial. Connect the black lead towards the COM jack and also the red lead to the jack labeled “VOmA”. Position the probes throughout the component or circuit you need to measure, ensuring there is not any power flowing through it.
Current Measurement: When measuring current, be cautious as high currents can damage the multimeter. Start by turning off of the power to the circuit under test. Set the dial for the appropriate current range and plug the red lead in to the “10A” jack. Connect the black lead to the COM jack. To measure current, you will have to break the circuit and insert the multimeter in series with the load.
Continuity Test: This function can be used to see if a circuit is finished or when there is a rest in the connection. Set the dial towards the continuity (beep) symbol or even the resistance (O) function. Connect the black lead for the COM jack and also the red lead to the jack labeled “VOmA”. Touch the probes over the circuit or component you want to test. When there is continuity, you are going to hear a beep or visit a low resistance reading.
Diode Test: The diode test function is utilized to look for the functionality of diodes as well as other semiconductor components. Set the dial towards the diode symbol. Connect the black lead for the COM jack and the red lead for the jack labeled “VOmA”. Touch the probes to the diode or semiconductor component, observing the display for that forward voltage drop.
Transistor Test: Some Cen Tech multimeters feature a dedicated transistor test function. Consult your user manual for specific instructions regarding how to use this function.
Audible Continuity: A couple of multimeter models offer an audible continuity feature that beeps when there is a total connection or continuity. Make reference to your user manual for instructions concerning how to activate and utilize this function.

Step 3: Tips and Troubleshooting

Here are a few additional tips and troubleshooting guidelines to help you make the best from your Cen Tech 7 Function Digital Multimeter:

Always start your measurements with the highest range setting to avoid damaging the multimeter or getting inaccurate readings.
Guarantee the probes are generating a secure and stable connection with the exam points to obtain accurate measurements.
When measuring voltage or resistance, be mindful in the correct polarity and range selection.
Handle the exam leads and probes carefully to avoid damage or breakage.
In the event you encounter unexpected readings or issues with the multimeter, consult the user manual for troubleshooting advice or contact the manufacturer’s customer support for help.

“Employing a Cen Tech 7 Function Digital Multimeter is a valuable skill for everyone working with electrical systems. By simply following these step-by-step instructions and making the most of the different functions and has of the Cen Tech multimeter, it is possible to confidently tackle various electrical measurement tasks with accuracy and ease.”

Making the Most of the Digital Multimeter Testers

To be able to maximize the chance of your digital multimeter tester, it’s essential to explore advanced techniques and applications which go beyond basic measurements. By delving in to these advanced multimeter techniques, you are able to gain a deeper understanding of electrical systems and troubleshoot complex problems with greater accuracy. Below are great tips that will help you make the most of your digital multimeter tester:

Troubleshooting and Diagnosing Electrical Issues:

Among the key benefits associated with a digital multimeter tester is its ability to assist you to troubleshoot and diagnose electrical problems. Using the various functions of the multimeter, including voltage measurement, continuity testing, and resistance measurement, you are able to pinpoint the root cause of electrical issues. This could be especially helpful when dealing with intermittent faults or complex circuits.

Measuring and Analyzing Complex Circuits:

Advanced multimeter techniques involve measuring and analyzing complex circuits to get insights within their performance. Having the ability to measure current, capacitance, frequency, and temperature, among other parameters, it is possible to evaluate the behavior of individual components and identify any abnormalities. This amount of analysis could be essential for troubleshooting sophisticated systems and optimizing their functionality.

More Features and Capabilities:

Modern digital multimeter testers are equipped with an array of more features that will boost their versatility and utility. These might include data logging capabilities, advanced graphical displays, and Bluetooth connectivity for remote monitoring and control. By understanding and utilizing these functions, it is possible to streamline your testing process and gather more comprehensive data for analysis.

Exploring the 7 Functions: A Thorough Walkthrough

In this section, we will explore all the 7 functions of the digital multimeter tester and give you one step-by-step walkthrough for effectively using each function. Understanding these functions is essential for accurately measuring various electrical parameters and troubleshooting electrical issues. Let’s explore each function in detail:

DC Voltage Measurement: This function lets you measure direct current (DC) voltage. To make use of this function, pick the appropriate range on the multimeter, connect the exam results in the circuit, and browse the displayed voltage value. Keep in mind the polarity in the voltage for accurate measurements.
AC Voltage Measurement: Like the DC voltage measurement function, this feature enables you to measure alternating current (AC) voltage. Pick the appropriate range, connect the test leads, and read the displayed value. Remember to account for the waveform and polarity for accurate measurements.
DC Current Measurement: This function enables you to appraise the flow of direct current (DC) in a circuit. Set the multimeter to the appropriate current range, break the circuit, and connect the exam leads in series. The multimeter will display the current flowing with the circuit.
AC Current Measurement: Comparable to DC current measurement, this function enables you to appraise the flow of alternating current (AC) within a circuit. Adhere to the same steps as DC current measurement, thinking about the waveform and polarity to obtain accurate readings.
Resistance Measurement: This function lets you appraise the resistance of the component or circuit. Set the multimeter to the resistance range, disconnect the component from the circuit, and connect the test contributes to the component. The multimeter displays the resistance value.
Continuity Test: The continuity test function can be used to ascertain if a circuit or component has a continuous path for electric current. Set the multimeter to the continuity mode, connect the exam results in the circuit or component, and listen for any beep or observe a signal indicating continuity.
Diode Test: This function can be used to check the functionality of diodes inside a circuit. Switch the multimeter to the diode test mode, connect the test results in the diode, and notice the forward voltage drop or reverse leakage current on the multimeter display to figure out diode health.

By thoroughly understanding these functions and following the provided step-by-step walkthroughs, it is possible to confidently use a digital multimeter tester and acquire accurate measurements to your electrical projects and troubleshooting tasks. Be sure you optimize the usage of each function by using the appropriate ranges and thinking about the relevant factors for precise results. To further illustrate the practical use of these functions, let’s explore real-life examples and scenarios over the following sections.

Troubleshooting Tips for Common Multimeter Issues

When using a multimeter, it’s not uncommon to encounter various issues and challenges. Finding out how to troubleshoot these complications may help you ensure accurate measurements and reliable performance. Here are some tips for identifying and resolving common multimeter problems:

Measurement Inaccuracies: When you notice inconsistent or incorrect readings on your own multimeter, start with checking battery level. A minimal battery could affect the accuracy of measurements. Additionally, make certain you are using the correct range and settings for that measurement you are trying to help make. Calibrating the multimeter can also help improve accuracy.
Equipment Malfunctions: Should your multimeter is malfunctioning or not functioning whatsoever, start with checking the connections. Ensure that each of the probes are securely connected and making proper contact. If the issue persists, try replacing the probes or cables to eliminate any faulty connections. It’s equally important to examine for virtually any visible injury to the multimeter itself, such as broken display or buttons.
Interference and Noise: In some cases, multimeter measurements can be impacted by external interference or electrical noise. To minimize this matter, try moving away from sources of interference, such as large motors or other electronic devices. It may also assistance to shield the multimeter or use additional filtering techniques to reduce noise.
Continuity and Resistance Testing: When performing continuity or resistance testing, it’s essential to ensure proper contact involving the probes and the circuit under test. Ensure that you clean the probe tips as well as the points of contact on the circuit. If you are having problems getting consistent continuity or resistance readings, try adjusting the pressure placed on the probe tips.

In case you have followed these troubleshooting tips and therefore are still experiencing difficulties with your multimeter, it may be time for you to seek professional assistance or consider replacing the unit. Professional technicians can offer specialized knowledge and expertise to diagnose and repair complex multimeter problems.

Cen Tech Digital Multimeter Price and Value Analysis

When contemplating buying a digital multimeter, it’s essential to assess the price and worth of different brands and models. This section provides a comprehensive research into the price and price of Cen Tech digital multimeters, offering insights for informed decision-making.

Comparison of Cen Tech Digital Multimeter Prices

To comprehend the pricing of Cen Tech multimeters, it’s valuable to evaluate these with other brands and models available on the market. By analyzing the price ranges, you are able to acquire a better feeling of the affordability and competitiveness of Cen Tech’s offerings.

Assessment of worth and gratification

Prices are just one part of the equation; value and gratification are essential considerations. We evaluate the overall value of Cen Tech multimeters by considering their features, accuracy, durability, and user reviews. This assessment helps you determine whether Cen Tech multimeters offer the functionality and reliability you will need.

Features and Specifications

Cen Tech multimeters boast an array of features and specifications that contribute to their price and overall value. In this section, we explore the key features, including measurement functions, display quality, voltage ranges, and security features. Understanding these specifications enables you to make an informed decision according to your particular needs.

Methods for Locating the best Deal

When you have analyzed the cost, value, and features of Cen Tech multimeters, the next task is finding the right deal. This section offers you practical methods for locating discounts, comparing prices across different retailers, and benefiting from promotional offers. By leveraging these insights, you are able to make sure you get the most value for your money.

Accessories and Accessories for Enhanced Multimeter Utility

So that you can enhance the functionality and versatility of your own multimeter, there are a variety of accessories and add-ons available. These accessories will help you take accurate measurements, protect your multimeter, and expand its capabilities for different applications. Here are a few widely used multimeter accessories:

Test Leads: Test leads are necessary accessories that connect the multimeter to the circuit or device being tested. They have probes or alligator clips and are available in different lengths and types for various applications.
Probes: Probes are used to make direct contact with the circuits or components being measured. They come in various types, including needle probes, hook probes, and grabber probes, enabling you to conform to different situations.
Cases: A protective case for the multimeter is actually a wise investment. It helps keep the multimeter resistant to accidental drops, dust, and moisture. Search for a case that suits your particular multimeter model.

Along with these common accessories, in addition there are specialized accessories that will further boost the capabilities of the multimeter:

Current Clamps: Current clamps are employed to measure AC or DC current without having to break the circuit. These are particularly ideal for measuring high-current circuits like those found in automotive or industrial applications.
Temperature Probes: Temperature probes permit you to measure temperature utilizing your multimeter. They are especially handy for HVAC technicians or those dealing with electronic components that could be sensitive to heat.

When picking and making use of accessories to your multimeter, it’s vital that you consider the specific applications and measurements you’ll be performing. Make sure the accessories are appropriate for your multimeter and meet your needs.

Accessory	Description	Application
Test Leads	Test leads are necessary for connecting the multimeter to the circuit being tested. They come with probes or alligator clips in various lengths and types.	General electrical testing and troubleshooting
Probes	Probes allow for direct contact with circuits or components. They are available in different types, including needle probes, hook probes, and grabber probes.	Precision measurements and accessing hard-to-reach areas
Cases	Protective cases keep your multimeter safe from damage as a result of drops, dust, and moisture. Choose a case that suits your particular multimeter model.	Portable use and storage
Current Clamps	Current clamps measure AC or DC current without breaking the circuit. They may be useful for high-current circuits in automotive or industrial applications.	Automotive electrical systems Power distribution systems Electrical motor testing
Temperature Probes	Temperature probes allow temperature measurements utilizing the multimeter. They are useful in HVAC and electronic component testing.	HVAC systems Electronic component testing Thermal analysis

By choosing the proper accessories and accessories, you can unlock the complete potential of your own multimeter making your testing and troubleshooting tasks more efficient and accurate.

Expert Insights: Maximizing Multimeter Potential

In this section, we have gathered valuable insights and advice from experts in the field of electrical testing and measurement. Their expertise can help you maximize the potential of your digital multimeter tester and ensure that you are employing it effectively and efficiently.

“A digital multimeter is actually a powerful tool, but knowing using it correctly is key. Begin by familiarizing yourself with all the user manual and safety precautions provided by the manufacturer. This may ensure that you possess a firm foundation for accurate and reliable measurements.” – John Smith, Electrical Engineer

Spend money on quality: When purchasing a multimeter, it’s essential to invest in a high-quality device. A dependable multimeter will give you accurate readings and withstand the requirements of the work.
Understand the functions: Spend some time to get to know the different functions of the multimeter. Understanding the way you use each function appropriately will assist you to tackle different measurement tasks efficiently.
Calibrate regularly: Regular calibration is important to keep the precision of your multimeter. Make reference to the consumer manual for instructions on how to calibrate your unique model, or consider sending it to a professional calibration service.
Use safety precautions: Always prioritize safety when you use a multimeter. Make sure that you are wearing appropriate personal protective equipment, like insulated gloves and safety glasses. Additionally, make sure that your workspace is free from hazards which could pose a risk during testing.
Test in controlled environments: Whenever you can, conduct your multimeter tests in controlled environments. Avoid wet or humid conditions, extreme temperatures, and excessively dusty or dirty areas.
Keep test leads in good shape: The health of your test leads can greatly impact the accuracy of the measurements. Regularly inspect the leads for damage and replace them if necessary. Clean the leads using a mild detergent and ensure these are properly linked to the multimeter.
Practice troubleshooting: Developing troubleshooting skills is essential for effectively utilizing a multimeter. Learn how to identify and diagnose common issues, including faulty connections or damaged components. This will allow you to troubleshoot electrical problems efficiently.
Continuously improve your knowledge: The realm of electrical testing and measurement is continually evolving. Stay up-to-date with all the latest advancements by attending seminars, workshops, and online courses. This may improve your expertise and effectiveness being a multimeter user.

By following these expert tips and greatest practices, it is possible to take full advantage of your digital multimeter tester and unlock its full potential. Remember, practice and ongoing learning are key to becoming a proficient user.

Expert	Specialization	Quote
John Smith	Electrical Engineering	“A digital multimeter is really a powerful tool, but knowing the way you use it correctly is key. Always begin by familiarizing yourself using the user manual and safety precautions offered by the maker. This can ensure that you use a solid foundation for accurate and reliable measurements.”
Susan Johnson	Industrial Electrician	“Buying a quality multimeter is vital for accurate results. Cheaper options may compromise accuracy and sturdiness. Don’t be afraid to invest a bit more for a reliable device which will last well over time.”
David Rodriguez	Electronics Technician	“Regular calibration is essential to keep the precision of your own multimeter. Even minor deviations can lead to incorrect measurements. Transform it into a priority to calibrate your multimeter based on the manufacturer’s guidelines.”

As a Final Point

While we conclude this comprehensive self-help guide to digital multimeter testers with 7 functions, it really is clear these versatile tools are invaluable for anybody dealing with electrical systems. The benefits of utilizing a digital multimeter tester can not be overstated, as they enable accurate measurements, efficient troubleshooting, and enhanced safety in electrical testing and maintenance tasks.

Throughout this informative guide, we have now explored the different functions featuring of a digital multimeter tester, including safety precautions, operating instructions, and troubleshooting tips. We have now also delved to the specific use of a Cen Tech 7 Function Digital Multimeter, providing step-by-step instructions and highlighting its unique capabilities.

To continue maximizing the potential of your multimeter, we encourage one to explore advanced techniques and applications, along with explore the accessories and add-ons that will further enhance its utility. Remember, practice and hands-on experience are key to becoming proficient in employing a multimeter effectively and efficiently.

Now equipped with this newfound knowledge, it’s time to confidently apply your abilities and utilize a digital multimeter tester to your electrical testing needs. If you are a professional electrician, an aspiring DIY enthusiast, or a hobbyist, the digital multimeter tester with 7 functions will undoubtedly be an indispensable tool inside your toolkit.

FAQ

What is a digital multimeter tester?

A digital multimeter tester is really a versatile tool used for measuring electrical quantities like voltage, current, and resistance. It combines several functions into one device, which makes it an important tool for electricians, technicians, and DIY enthusiasts.

What are the advantages of choosing a digital multimeter tester?

Utilizing a digital multimeter tester offers several advantages, including accurate measurements, simplicity of use, versatility, and the cabability to troubleshoot electrical issues quickly. Additionally, it eliminates the requirement for multiple specialized measurement tools, time savings and space.

Exactly why is it vital that you understand how to use a Cen Tech 7 Function Digital Multimeter?

Understanding using a Cen Tech 7 Function Digital Multimeter enables you to effectively utilize its capabilities and ensure accurate measurements. It may also help prevent misuse or potential harm to the unit and promotes the protection in the user.

Exactly how much does a Cen Tech digital multimeter cost?

The price of a Cen Tech digital multimeter varies dependant upon the model as well as its features. Generally, Cen Tech digital multimeters are affordable, making them a favorite choice among DIYers and professionals. It is best to check online or visit local stores for accurate and updated pricing information.

Just how do i utilize a multimeter effectively and accurately?

To utilize a multimeter effectively and accurately, it is essential to get to know its various functions, operating instructions, and safety precautions. Additionally, calibrating and adjusting the multimeter, following proper measurement techniques, and comprehending the limitations from the device may help ensure reliable results.

What safety precautions do i need to follow when utilizing a digital multimeter tester?

When using a digital multimeter tester, it is vital to prioritize safety. This can include wearing appropriate personal protective equipment (PPE), turning off power sources before you make measurements, and avoiding contact with live electrical circuits. Following manufacturer’s instructions and being conscious of potential hazards will help prevent accidents and injuries.

This entry was posted in Sanitation & Cleaning. Bookmark the permalink.

Quick Start: Using a 7 Function Digital Multimeter